Schöck uses cookies to ensure that we give you the best experience on our website. By using the website you agree to the terms and conditions of the privacy policy.


All types at a glance.Schöck Combar®.

Straight bars

As a load bearing reinforcement that absorbs tensile forces in concrete

When steel reaches its limits: Schöck ComBAR®

Diameter / Standard lengths

Ø 8 mm / 10 m
Ø 12 mm / 11,80 m
Ø 16 mm / 11,80 m
Ø 20 mm / 11,80 m
Ø 25 mm / 11,80 m
Ø 32 mm / 14 m

Other diameters are available on request

Bar with shear stud anchor

As a shear reinforcement for slabs and balconies exposed to shear stress, for reducing the anchor length of straight bars

Schöck ComBAR® head

Diameter / Standard lengths

Ø 12 mm / up to 4 m
Ø 16 mm / up to 4 m
Ø 20 mm / up to 4 m
Ø 25 mm / up to 4 m
Ø 32 mm / up to 4 m

Other diameters are available on request

Bent bars / Stirrups

For cage reinforcement and installation - Bent bars are prefabricated before shipment to the building site.

Schöck ComBAR® stirrup

Diameter / Maximum length

12 mm / up to 6.5 m
16 mm / up to 6.5 m
20 mm / up to 6.5 m

Plastic clips and spacers

If you want your reinforced structure to be entirely non-metallic, we can provide plastic clips as spacers for right-angled connections between the Schöck Combar® bars and plastic tubes.


The clips can be attached to the bars using a rubber hammer, for example. Currently, clips are available for joining bars measuring 8 mm to 8 mm and 12 mm to 12 mm. Plastic cable ties can also be used to join the bars.

ComBAR® Spacer

The tube is delivered to the building site in 2 m lengths. It can be cut to the required length on site, using a pair of pliers or a wood saw, for example.