search

Isokorb type K – for concrete-to concrete connections

11_03_Isokorb_470x265px_rgb_72
Marsh_Wall
ThermalBreak
The Schöck Isokorb® type K with its HTE (high thermal efficiency) module, is a load bearing thermal insulation element for cantilever balconies and provides a thermal break between external reinforced concrete components and the building. The innovative H

The element transfers bending moment, stress and shear forces, plus its integrated hanging and perimeter tensile reinforcement – which are fitted as standard – also save the unnecessary and costly use of extra stirrups or hooped mat.

All of the Isokorb® thermal break modules provide BBA Certification and LABC Registration, with the range comfortably exceeding the UK regulation (BRE IP1/06). This requires that the temperature factor used to indicate condensation risk (fRSI), must be greater than, or equal to, 0.75 for dwellings, residential buildings and public buildings. There is also compliance with the Government Standard Assessment Procedure, SAP 2009, concerning CO2 emissions from buildings and respectively heat losses through non-repeating thermal bridges. Here, the lambda values of the Schöck Isokorb® enable energy loss in various connective situations to be reduced by as much as 84% to 91%.

The type K units are light and easily handled by one man, offering fast and simple "drop-in" installation, averaging less than five minutes per unit.

For your free copy of the Schöck Specifiers Guide and /or the Technical Guide contact Schöck Ltd on 01865 290 890.

Downloads

130211_Isokorb_Type_K.pdf

pdf, 1,22 MB

72dpi-49.zip

zip, 937,11 KB

300dpi-40.zip

zip, 5,39 MB