search

Schöck Isokorb® supplementary type HP

Schöck Isokorb® supplementary type HP

The Schöck Isokorb® supplementary type HP with 80 mm insulation thickness is a load bearing thermal break element suitable for standard existing horizontal forces.

The Schöck Isokorb® supplementary type HP-A transmits forces parallel to the insulation layer.
The Schöck Isokorb® supplementary type HP-B transmits forces perpendicular to the insulation layer.
The Schöck Isokorb® supplementary type HP-C transmits forces both parallel as well as perpendicular to the insulation layer.

The Schöck Isokorb® supplementary type HP-A or supplementary type HP-B is to be included only in combination with an approved Isokorb® type K, type Q, type QP or type D.

Benefits

  • BBA Certification
    Technically approved and certified by the BBA
  • Fire resistance class REI120
    Also available in fire resistance class REI120
  • Detailed planning literature
    Technical Information, Certificates, Approvals, the Thermal Bridging Portal and Installation instructions
  • Standardised
    Available in standard heights of 160 mm – 250 mm; other heights and constructions available on request

Downloads

Technical Information

Technical Information Schöck Isokorb® supplementary type HP

pdf, 762,36 KB (21/02/2017)

If you have any questions or require a personal consultation, please contact:

Hotline Technical design department

Phone: 01865 290 890

Fax: 01865 290 899

E-Mail: design@schoeck.co.uk